DGM 1035 FOLDER
The DGM 1035 folder has a rated speed of 35,000 copies per hour and is available in three cutoffs. The DGM 1035 FOLDER has a ten web capability. The quarter folder has a pecking type chopper assembly, with tape transport system. system.
- Cutoffs:
21 1/2″, 22″ and 22 3/4″
(546mm, 560mm and 578mm) - Speed:
Max. 35,000 PPH – 1/2 and 1/4 fold
Max: 25,000 PPH – D/P - Webs:
Min. 1/2 web of 30 lb. Newsprint at 32,000 PPH
Max. 10 webs of 30 lb. Newsprint at 25,000 PPH - Delivery:
Fold first for 1/2 fold and DP
Closed head leading/Spine to RTF side 1/4 fold
Motorized conveyor – press speed tracking and adjustable shingle
All products delivered to a common conveyor - Web Size:
1/2 and 1/4 fold a minimum 20″ (508mm) full web or 10″ (254mm) ribbon
1/2 and 1/4 fold a maximum 36″ (914mm) full or 18″ (457mm) ribbon - Lap Adjustment:
Stop and move design
Max. +/-.35 (8.88mm) by moving shims - Former Section:
56 degree newspaper former, drilled for air, pneumatic trolleys and driven tabloid slitter
Optional: 72 degree long former; upper former - Pin Cylinder:
Available in .250 (6.35mm) or .437 (11.09mm) pin hole to lead edge spacing
12 pins across cylinder - Jaw Cylinder:
Single piece 2 around cylinder
Torsion Bar Jaw Spring and double track cam followers riding on side by side plate cams.
Cam timing is adjustable from front of folder. - 1/4 Folder:
Pecking type chopper assembly
Tape transport system - Conforming safety guards; CE and ANSI
- Optional cross-perf with on run phasing
- Optional 3rd set nipping rollers
- Optional triple under folder leads
Standard Features
